Muse Glimmer VRAM requirements aren't one number, they're four, one per checkpoint, and the gap between the smallest and the largest is wide: 16GB at the low end, over 55GB at the high end. It runs offline on your own device, but which device depends entirely on which checkpoint you pull and whether you load its DFlash drafter alongside it. This is the quantization-to-GPU map, the drafter tradeoff, and the exact steps to deploy it with vLLM on a rented GPU instead of guessing.
TL;DR: Muse Glimmer VRAM Requirements and GPU Setup
- Full precision: Muse Glimmer needs over 55GB at BF16, or 60-65GB with KV cache by some estimates, as of its 10 Aug 2026 release.
- Quantized tiers: INT8 needs roughly 32GB and INT4 roughly 16GB per Spheron's GPU recommender; Unsloth's 4-bit GGUF totals about 17GB combined RAM+VRAM.
- GPU match: full precision fits an A100 or H100 80GB; INT8 fits an L40S 48GB rental; 4-bit/INT4 fit an RTX 4090 24GB.
- DFlash drafter: proposes 16 tokens per forward pass for verification and ships quantized to cut its own VRAM overhead, with no quality loss.
- Spheron: every tier above, 24GB through 80GB, rents by the minute with no reserved contract.
Muse Glimmer Setup Guide: What Meta's 30B Agent Model Actually Is
Muse Glimmer is built for always-on local agent workflows rather than as a general chat model. It's a 30-billion-parameter model distilled from Muse Spark, Meta's much larger teacher model that needs a multi-GPU node of its own to serve, which we covered in our Muse Spark Open deploy guide. The distillation is the point: Muse Glimmer inherits Muse Spark's tool-calling and planning behavior in a footprint small enough for one GPU.
Meta also shipped day-0 serving support across an unusually wide stack: llama.cpp, MLX, ExecuTorch, Ollama, LM Studio, Unsloth, vLLM, SGLang, Together AI, Fireworks AI, and OpenRouter, with weights, GGUF quantizations, and ExecuTorch builds published on Hugging Face at launch. That matters for a Muse Glimmer setup guide because the "run Muse Glimmer locally" and "vLLM Muse Glimmer" paths aren't two separate communities improvising support weeks later; both were live the day the research post went up.
If you're sizing it against other single-GPU agent models already covered on this blog, Muse Glimmer sits closest to Nemotron 3.5 Bolt, NVIDIA's native-quantized agent model engineered to fit 24GB, and Cohere North Mini Code, a 30B agentic coding model with its own VRAM-by-precision table. Both raise the same question: pick the quantization tier first, then the GPU.
Muse Glimmer VRAM Requirements by Quantization: Full Precision to 4-Bit
Muse Glimmer's VRAM requirement changes by roughly a factor of four depending on which checkpoint you load. Full precision needs more memory than any single consumer GPU carries; the 4-bit and INT4 builds fit inside a 24GB card with room left for KV cache. Here's how the published and estimated figures line up against rentable single-GPU tiers:
| Checkpoint | VRAM needed | Smallest GPU tier that fits |
|---|---|---|
| Full precision (BF16) | over 55GB (60-65GB with KV cache) | A100 80GB or H100 80GB |
| INT8 | ~32GB | L40S 48GB |
| 4-bit GGUF (Unsloth) | ~17GB total RAM+VRAM | RTX 4090 24GB |
| INT4 | ~16GB | RTX 4090 24GB |
The INT8 and INT4 figures come from Spheron's GPU recommender for Muse Glimmer-30B, which also adds roughly 10% headroom on top of each figure for production traffic, the number worth budgeting against rather than the bare checkpoint size.
VRAM and the DFlash Drafter: What Actually Changes Throughput
DFlash is Meta's speculative decoding drafter for Muse Glimmer, built on a block-diffusion design rather than the small-transformer drafters most model families pair with their base model. Instead of proposing one token at a time, DFlash proposes 16 tokens per forward pass, and the full Muse Glimmer model verifies the batch in a single parallel pass. Meta states the output quality is identical to standard autoregressive generation; the drafter only changes how fast you get there, not what you get.
That speed doesn't come free in VRAM. Meta ships multiple quantized versions of the drafter specifically to cut its own memory overhead, because the drafter's weights sit on top of whatever Muse Glimmer checkpoint you already loaded. On a 24GB card running the 4-bit or INT4 checkpoint, a quantized DFlash build is the difference between headroom for KV cache on a long agent trajectory and running out of memory on the first multi-step tool call.
More VRAM headroom means you can run the full-precision or INT8 checkpoint alongside the unquantized drafter and still serve more than one agent session at a time. Consumer-class hardware faces constraints at the concurrency a real agent workload produces: queued tool calls, multiple sessions, longer contexts stacking up KV cache. That's the gap a rented GPU closes.
Which GPU to Rent for Muse Glimmer on Spheron
Each Muse Glimmer checkpoint maps to one of Spheron's rentable single-GPU tiers. Spheron's pricing page lists live, per-minute-billed rates aggregated across 5+ providers, spanning every tier this model needs:
- 4-bit GGUF or INT4 fits an RTX 4090 24GB at $0.48/hr on-demand, or an RTX 5090 32GB at $0.78/hr on-demand if you want headroom for a longer context or bigger batch.
- INT8 fits an L40S 48GB at $0.96/hr on-demand, or an RTX PRO 6000 96GB at $2.35/hr on-demand ($1.36/hr spot) if you also want room for the unquantized DFlash drafter.
- Full precision (BF16) fits an A100 80GB rental at $1.48/hr on-demand ($1.56/hr spot), or an H100 80GB at $2.98/hr on-demand ($2.20/hr spot) for faster prefill on longer agent contexts.
As of this check, Spheron doesn't list a spot rate for RTX 4090 or RTX 5090, so the two cheapest quantized tiers are on-demand only; A100, H100, and RTX PRO 6000 all carry both on-demand and spot listings, worth considering for a development box you don't need running overnight. This catalog is raw GPU rental, not a managed Muse Glimmer endpoint, so a hosted API without any self-hosting means a different kind of provider.
Don't assume the faster card is automatically the better deal. For picking a serving tier: divide the two hourly rates, time a short slice of your actual workload on both, and only pay for the faster card if its speedup beats the price gap.
Deploy Muse Glimmer on GPU Cloud with vLLM: Step-by-Step
- Pick the GPU tier that matches your checkpoint from the table above and launch it on Spheron. See Spheron's docs for the deploy flow if you haven't rented an instance before.
- Pull the vLLM OpenAI-compatible image,
vllm/vllm-openai, the same container used across Spheron's model deploy guides. - Launch vLLM pointed at the Muse Glimmer checkpoint from Hugging Face, setting
--tensor-parallel-size 1since every checkpoint in the table above fits one GPU, and the quantization flag matching the build you pulled (INT8, INT4, or none for BF16). - Expose the OpenAI-compatible endpoint and confirm it's live with a
curlto/v1/models, then a test request to/v1/chat/completions. - Point your agent framework at that endpoint the same way you'd point it at any OpenAI-compatible API.
The container mechanics are consistent regardless of model size. The pull and networking steps behind a Muse Glimmer deploy follow a similar curve; only the weight-loading time at the end changes.
Pricing fluctuates based on GPU availability. Spheron rates above are live as of 16 Nov 2026; other providers reflect their most recent published rates and may have changed. Check current GPU pricing → for live rates.
Muse Glimmer vs Gemma4-31B and Qwen3.6-27B: Agentic Benchmarks
The split across three models is clean enough to be useful for picking a model rather than just a GPU:
| Benchmark | Muse Glimmer | Gemma4-31B | Qwen3.6-27B |
|---|---|---|---|
| MCP Atlas (tool use) | 75.5 | 54.2 | 62.5 |
| DeepSearch QA | 74.6 | 61.7 | 71.1 |
| Desktop interface control | 65.9 | N/A | 75.6 |
| Terminal tasks | 51.7 | N/A | 60.7 |
Muse Glimmer leads on tool-use and search-style agentic tasks, where MCP Atlas and DeepSearch QA both favor it over Gemma4-31B and Qwen3.6-27B. Qwen3.6-27B leads back on desktop interface control and terminal tasks, the two benchmarks closer to GUI and shell automation than to tool-calling. Pick the model against the agent workload you're actually running, not the aggregate score.
Four Muse Glimmer checkpoints means four different GPU tiers, not one. Whichever quant you land on, from the 24GB entry point to the 80GB full-precision build, check it against live rates on Spheron's catalog before you commit.
Quick Setup Guide
Match your Muse Glimmer checkpoint (full precision, INT8, 4-bit GGUF, or INT4) to the smallest GPU tier that fits it, then launch that instance on Spheron.
Pull the vllm/vllm-openai container, the same image used across Spheron's other model deploy guides.
Start vLLM with --tensor-parallel-size 1, since every checkpoint in the VRAM table fits a single GPU, and set the quantization flag to match the build you pulled (INT8, INT4, or none for BF16).
Confirm the endpoint is live with a curl request to /v1/models, then send a test request to /v1/chat/completions.
Connect your agent framework to the new endpoint the same way you would point it at any other OpenAI-compatible API.
Frequently Asked Questions
It depends on the checkpoint. Full precision needs over 55GB VRAM, or 60-65GB with KV cache. Spheron's GPU recommender puts the INT8 checkpoint at roughly 32GB and the INT4 checkpoint at roughly 16GB, and Unsloth's 4-bit GGUF build totals about 17GB of combined RAM and VRAM.
Yes, for every checkpoint. Full precision fits an 80GB card like an A100 ($1.48/hr on-demand) or H100, INT8 fits an L40S 48GB, and the 4-bit or INT4 builds fit an RTX 4090 24GB, all as single-GPU rentals with no multi-GPU setup required.
Yes. Meta shipped day-0 Ollama support alongside llama.cpp, MLX, ExecuTorch, LM Studio, Unsloth, vLLM, SGLang, Together AI, Fireworks AI, and OpenRouter, so `ollama pull` works against the official GGUF builds without waiting for community conversion.
DFlash is Meta's block-diffusion speculative decoding drafter. It proposes 16 tokens per forward pass for the full model to verify in parallel, and Meta ships quantized drafter builds specifically to keep its own VRAM overhead down. Meta states output quality stays identical to standard generation, only the speed changes.
Muse Glimmer leads both on agentic benchmarks: MCP Atlas tool-use scores 75.5 against 54.2 for Gemma4-31B and 62.5 for Qwen3.6-27B, and DeepSearch QA scores 74.6 against 61.7 and 71.1. Qwen3.6-27B leads back on desktop interface control (75.6 vs 65.9) and terminal tasks (60.7 vs 51.7).







