Qwen3.8-Flash-Next-E384-FP4-V2 GPU Requirements: VRAM & Cheapest GPU
Qwen3.8-Flash-Next-E384-FP4-V2 has about 80.1B parameters. See exactly how much GPU memory it needs at FP16, INT8, and INT4, and the cheapest GPU to run it, with live hourly pricing from 5+ data center partners.
- Parameters
- 80.1B
- Min VRAM (INT4)
- 44 GB
- Cheapest (INT4)
- $0.78/hr
- Deploy
- < 2 min
To run Qwen3.8-Flash-Next-E384-FP4-V2 for inference at FP16, you need roughly 175 GB of VRAM. The cheapest fit on Spheron is 4x RTX 6000 Ada 48GB at about $3.12/hr. Quantize to INT4 to run it on a smaller, cheaper GPU.
VRAM required
Estimated peak VRAM including weights, activations, and KV cache. Add 10% headroom for production traffic.
- 01$0.78/hr$3.12/hr4× RTX 6000 Ada 48GBCHEAPESTAda Lovelace · GDDR6 ECC
- 02$3.59/hr$3.59/hr1× MI300X 192GBAMD CDNA 3 · HBM3 · ROCm, check kernel support
- 03$0.96/hr$3.84/hr4× L40S 48GBAda Lovelace · GDDR6
- 04$2.39/hr$4.78/hr2× RTX PRO 6000 96GBBlackwell · GDDR7
- 05$1.43/hr$5.72/hr4× A100 80GBAmpere · HBM2e
Live pricing aggregated from 5+ data center partners. Per-minute billing, no commitments.
Self-host Qwen3.8-Flash-Next-E384-FP4-V2 or use managed inference
Rent the GPUs and run Qwen3.8-Flash-Next-E384-FP4-V2 yourself, or skip the hardware with managed LLM inference: an OpenAI compatible API on open models, or dedicated inference endpoints for your own fine tuned model.
Run it yourself on GPUs
- VRAM at FP16
- 175 GB
- Cheapest fit
- 4x RTX 6000 Ada 48GB from $3.12/hr
- Full control of weights, serving stack and batch size
- Per-minute billing, stop when you are done
- You size, scale and keep the GPUs up
Use a managed inference API
- Endpoint
- OpenAI compatible
- Pricing
- A fixed monthly token plan
- No GPUs to size, run or scale
- Requests at once held for you, uptime SLA in the contract
- Dedicated endpoints for your own fine tuned model
VRAM required to run Qwen3.8-Flash-Next-E384-FP4-V2
Estimated peak VRAM at context length 4,096 and batch size 1, including weights, activations, and KV cache. Quantizing to INT8 (Q8) or INT4 (Q4) cuts memory roughly in half and in quarter.
| Precision | Inference | LoRA fine-tune | Full fine-tune |
|---|---|---|---|
| FP16 | 175 GB | 262 GB | 698 GB |
| INT8 | 87 GB | 131 GB | 349 GB |
| INT4 | 44 GB | 65 GB | 175 GB |
Cheapest GPU to run Qwen3.8-Flash-Next-E384-FP4-V2 by precision
175GB
Full precision. Best quality, highest memory.
87GB
8-bit quantized. ~2x smaller, minimal quality loss.
44GB
4-bit quantized. ~4x smaller, runs on smaller GPUs.
Inference vs fine-tuning Qwen3.8-Flash-Next-E384-FP4-V2
Inference only holds the model weights plus a KV cache, so it is the cheapest setup. LoRA fine-tuning adds a small adapter and roughly 50% more memory. Full fine-tuning holds gradients and optimizer state on top of the weights, which is about 4x the inference footprint, so it often needs multiple GPUs even when inference fits on one. For Qwen3.8-Flash-Next-E384-FP4-V2, an on-demand RTX 6000 Ada 48GB instance covers inference and LoRA, while a full fine-tune needs several times that memory and often spans multiple GPUs. Check the live GPU pricing for current rates.
Similar models
Compare GPU requirements for models in the same class.
74.0Bnvidia/NVIDIA-Nemotron-3.5-Bolt-74B-A9B-24GB-GGUF
87.8BMia-AiLab/GLM-5.3-Flash-EXL3-4bpw-TensorFold-Ablit
72.0Bswiss-ai/Apertus-v1.5-70B
96.5Bnvidia/Qwen3.8-Flash-Next-FP4-Local
65.8Bnvidia/NVIDIA-Nemotron-3.5-Super-VL-120B-A12B-NVFP4
104Bstepfun-ai/Step-3.7-Flash-NVFP4
Qwen3.8-Flash-Next-E384-FP4-V2 GPU questions
VRAM, GPU choice and cost questions for running Qwen3.8-Flash-Next-E384-FP4-V2 on cloud GPUs.
Qwen3.8-Flash-Next-E384-FP4-V2 has about 80.1B parameters. At FP16 it needs roughly 175 GB of VRAM for inference, including weights, activations, and KV cache. Quantized to INT4 that drops to around 44 GB. Leave about 10% headroom for production traffic.
For FP16 inference, the cheapest fit on Spheron is 4x RTX 6000 Ada 48GB at about $3.12/hr. If you quantize to INT4, RTX 6000 Ada 48GB at about $0.78/hr runs it for less. Pricing is aggregated live from 5+ data center partners with per-minute billing.
LoRA fine-tuning adds roughly 50% on top of inference memory, so it usually fits the same class of GPU. Full fine-tuning holds gradients and optimizer state and needs about 4x the inference VRAM, which often means multiple GPUs for Qwen3.8-Flash-Next-E384-FP4-V2. The VRAM matrix above shows the exact estimate for each setup.
We read the parameter count directly from the model's safetensors metadata on HuggingFace, then estimate peak VRAM from weights, activations, KV cache, and framework overhead at your chosen precision. The estimate lands within about 15% of real-world use for most transformer models.
Quantized to INT4, Qwen3.8-Flash-Next-E384-FP4-V2 needs about 44 GB of VRAM, so it is too large for a single 24 GB RTX 4090 and needs a bigger card or multiple GPUs. At FP16 it needs roughly 175 GB, which usually means a data center GPU. The precision picks above list the cheapest GPU that fits each setup.
Only at INT4. Qwen3.8-Flash-Next-E384-FP4-V2 needs about 175 GB at FP16 and 87 GB at INT8, both more than one 80 GB H100 holds. Quantized to INT4 it needs about 44 GB and fits one H100. The precision picks above show the cheapest GPU that fits each setup on Spheron.
Qwen3.8-Flash-Next-E384-FP4-V2 needs 3 x 80 GB GPUs at FP16 (about 175 GB of VRAM), 2 x 80 GB GPUs at INT8 (87 GB) and one 80 GB GPU at INT4 (44 GB). All of these fit inside a single 8-GPU node, so no multi-node setup is needed for inference. Smaller cards such as 48 GB or 24 GB GPUs need proportionally more of them.
Qwen3.8-Flash-Next-E384-FP4-V2 needs about 87 GB of VRAM at INT8, roughly half its FP16 footprint of 175 GB. The cheapest INT8 fit on Spheron is 2x RTX 6000 Ada 48GB at about $1.56/hr. INT8 is the usual middle ground: half the memory of FP16, with a smaller quality drop than 4-bit quantization.
Running Qwen3.8-Flash-Next-E384-FP4-V2 around the clock at FP16 costs about $2,278 a month on 4x RTX 6000 Ada 48GB (730 hours at $3.12/hr). Quantized to INT4 it costs about $569 a month on RTX 6000 Ada 48GB (730 hours at $0.78/hr). Spheron bills per minute, so stopping the instance when it is idle cuts that figure directly.
Qwen3.8-Flash-Next-E384-FP4-V2 needs about 175 GB at FP16, 87 GB at INT8 and 44 GB at INT4. Use FP16 when output quality matters most or you plan to fine-tune, INT8 for most production inference, and INT4 when cost or GPU size is the constraint: the cheapest INT4 fit is RTX 6000 Ada 48GB at about $0.78/hr.