Comparison

NVIDIA Desk-Side AI Box Comparison: DGX Spark vs DGX Station GB300 (2026)

Back to BlogWritten by Published Nov 17, 2026
NVIDIA Desk-Side AI Box ComparisonDGX Spark vs DGX Station GB300GB10 vs GB300DGX Spark vs DGX Station GB300 PriceGB10Blackwell UltraUnified Memory AI WorkstationGPU Comparison
NVIDIA Desk-Side AI Box Comparison: DGX Spark vs DGX Station GB300 (2026)

This is the first NVIDIA desk-side AI box comparison on this blog that doesn't involve a third party. DGX Spark against a Mac Studio, an RTX 5090, or an AMD Strix Halo box is a comparison about picking an architecture. DGX Spark against DGX Station GB300 is a comparison about a receipt: a $4,999 to $6,950 box against an $85,000 one, both built by NVIDIA, both marketed as desk-side AI hardware. That's a 12 to 17x jump in price, and the question that actually matters is whether it's also a 12 to 17x jump in what the box can run.

TL;DR: NVIDIA Desk-Side AI Box Comparison, DGX Spark vs DGX Station GB300

DGX Spark is NVIDIA's $4,999-$6,950 dev box; DGX Station GB300 is its $85,000 single-GPU workstation.

  • Price: DGX Spark costs $4,999-$6,950; DGX Station GB300 costs $85,000, a 12-17x gap, as of 17 Nov 2026.
  • Memory: DGX Spark's GB10 reports ~119.68GB usable; DGX Station GB300 holds 748GB coherent, as of 17 Nov 2026.
  • Measured: StorageReview found DGX Station GB300 (the MSI WS300) runs 14-19x a DGX Spark's throughput, as of 17 Nov 2026.
  • NVIDIA's split: DGX Spark targets models up to ~100B parameters; DGX Station targets up to ~1 trillion, as of 17 Nov 2026.
  • Spheron: Spheron rents standalone B300 on-demand at $11.47/hr as of 20 Nov 2026, once a box's ceiling is the blocker. Check B300 availability.

The NVIDIA Desk-Side AI Box Comparison: GB10 Dev Box vs GB300 Superchip Workstation

Both boxes pair an Arm-based Grace CPU with a Blackwell GPU on one superchip, sharing a single coherent memory pool instead of separate CPU RAM and GPU VRAM over PCIe. That's where the similarity ends. DGX Station GB300 runs a full GB300 Superchip: a Grace CPU paired with a B300 Blackwell Ultra GPU, the same silicon family that goes into GB300 NVL72 racks, at up to 1,600W on a dedicated 20A circuit.

SpecDGX Spark (GB10)DGX Station GB300 (B300 Superchip)
CPU20-core Arm GraceGrace CPU
GPUBlackwell (GB10)B300 Blackwell Ultra
Unified/coherent memory128GB LPDDR5X (~119.68GB usable)748GB (252GB HBM3e + 496GB LPDDR5X)
Memory bandwidth273 GB/s7.1 TB/s (HBM3e side)
Compute (FP4, sparse)1 PFLOP20 PFLOPS
NetworkingConnectX-7, 200GbEConnectX-8 SuperNIC, up to 800 Gb/s
Power240WUp to 1,600W, 20A circuit
Price$4,999 (64GB) / $6,950 (128GB)$85,000 (MSI XpertStation WS300)

It's worth being precise about what DGX Station GB300 is not. It's one B300 Superchip, not a slice of a GB300 NVL72 rack, which wires 72 of the same B300 GPUs and 36 Grace CPUs into a single liquid-cooled cabinet instead of one desk-side unit. Our GB300 NVL72 vs GB200 NVL72 pricing breakdown covers the rack-scale version's full specs; this post is about the one-GPU desk-side version only.

128GB vs 748GB Unified Memory: What Each Tier Actually Fits

The headline memory numbers overstate the real gap, and understate the bandwidth gap.

BoxUsable memoryBandwidthFine-tuning ceiling
DGX Spark~119.68GB273 GB/sQLoRA up to ~70B dense; standard LoRA up to ~32B
DGX Station GB300748GB coherent7.1 TB/s (HBM3e)LoRA up to ~337B dense; full fine-tune up to ~61B

Our DGX Spark fine-tuning breakdown runs the same LoRA, QLoRA, and full fine-tune VRAM formula against that 119.68GB pool: QLoRA reaches 70B dense models with real headroom, standard LoRA stops working past roughly 32B, and full fine-tuning never clears single-digit billions of parameters before Adam's optimizer state exceeds the whole pool. Running the identical formula against DGX Station GB300's 748GB, covered in our DGX Station GB300 fine-tuning guide, moves every ceiling up by roughly an order of magnitude: standard LoRA holds up to around 337B dense parameters, and a 4-bit QLoRA pass over a sparse MoE model like DeepSeek-V3 (671B total, 37B active) needs only about 335GB, comfortably inside the pool.

Neither box closes the gap that actually matters once a job needs more than one GPU's worth of NVLink domain. Both are single-GPU systems: DGX Spark has no second GB10 to shard a full fine-tune across, and DGX Station GB300 has no second B300 either, short of buying a full GB300 NVL72 rack reservation. A model that doesn't fit one of these pools at the quantization level you're using doesn't get rescued by buying a second desk-side box of the same kind; it needs multi-GPU sharding, which only a cloud cluster or a 72-GPU rack can offer.

Pricing fluctuates based on GPU availability. Spheron rates above are live as of 20 Nov 2026; DGX Spark and DGX Station GB300 prices reflect NVIDIA's and its OEM partners' most recently published figures as of this post's date and may have changed. Check current GPU pricing → for live rates, and each OEM's own listing for current desk-side pricing.

The Only Head-to-Head Benchmark

Spec sheets are easy to compare; measured throughput on the same models is not, because almost nobody has run both boxes side by side. StorageReview's hands-on review of the MSI XpertStation WS300, a certified DGX Station GB300 build, is the exception.

The throughput ladder reads: DGX Spark at the bottom, discrete workstation GPUs in the middle on models that fit their VRAM, and DGX Station GB300 well ahead on anything large enough to need 748GB of coherent memory to hold at all.

The two boxes aren't really competing for the same buyer or the same job once you're past the spec sheet. Our DGX Station GB300 price and break-even guide runs that $85,000 figure against the only published GB300-class hourly cloud rate anywhere, for teams who want the ownership-vs-renting math rather than the ownership-vs-DGX-Spark math.

Who Should Buy Which: Prototyping vs Production-Scale Local Fine-Tuning

Buy a DGX Spark if your workload is genuinely a prototyping and dev problem: testing prompts, running evals, fine-tuning with QLoRA on models up to 70B dense, or validating that a model and framework combination even works before committing real budget to it. At $4,999 to $6,950, it's priced to sit on a desk as a development tool, not a production dependency, and NVIDIA's own framing, models up to roughly 100B parameters for individual developers, matches that use case closely. Our DGX Spark 64GB pricing and Sync Clustering guide covers the current price split between the 64GB and 128GB tiers in more depth, including the option to cluster two 64GB units if the 200B-parameter ceiling that clustering reaches is closer to what you actually need than DGX Station GB300's 748GB.

Buy a DGX Station GB300 only if the 748GB pool and 20 petaFLOPS of FP4 compute are solving a real, recurring bottleneck rather than a hypothetical one. That's a team doing constant, heavy single-GPU fine-tuning on dense models in the 70B to 337B range, or local inference on frontier-scale open models, where the daily cost of waiting on shared cluster time outweighs an $85,000 upfront cost and a dedicated 20A circuit. It's a worse fit for anyone whose actual job is bursty, or who needs more than one GPU's worth of NVLink domain, since a DGX Station GB300 can't scale past its own single GPU any more than a DGX Spark can.

Both boxes eventually hit the same kind of wall: a job too large for one GPU's NVLink domain, more concurrent users than a single accelerator can serve, or a need for 24/7 uptime neither desk unit offers an SLA for. Our DGX Spark and GPU cloud pipeline guide covers the local-to-cloud handoff from the DGX Spark side in detail. From the DGX Station GB300 side, the equivalent step up is a GB300 NVL72 reservation, which Spheron sizes from a single node up rather than forcing a full 72-GPU commitment, though it runs on a quoted reservation with a typical 24-to-48-hour turnaround rather than an instant checkout rate. For jobs that need GB300-class throughput without a rack reservation at all, standalone B300 GPUs book self-serve and bill by the minute. Worth saying plainly: Spheron doesn't sell or rent either physical desk-side box, so it has nothing to add to the purchase decision itself, only to what happens once a workload outgrows whichever one gets bought.

Once either box's single-GPU ceiling becomes the actual blocker, not the budget, Spheron rents standalone B300 by the minute and reserves GB300 NVL72 capacity from a single node up.

Check live GPU pricing on Spheron →

FAQ / 04

Frequently Asked Questions

Buy a DGX Spark ($4,999 for 64GB, $6,950 for 128GB) if you're prototyping, fine-tuning with QLoRA up to about 70B parameters, or testing whether a workload needs GPU hardware at all. Buy a DGX Station GB300 ($85,000) only if a single accelerator's 748GB of coherent memory and 20 petaFLOPS of FP4 compute is the actual bottleneck, not the budget, because the price gap between them is 12 to 17x and the measured throughput gap StorageReview found is only 14 to 19x. For most teams, renting a single B300 or H200 by the hour closes that gap without either purchase.

DGX Station GB300 lists at $85,000, confirmed at MSI's XpertStation WS300. DGX Spark runs $4,999 for the 64GB configuration or $6,950 for the 128GB Founders Edition, which itself started at $3,999 and rose 18% to $4,699 before climbing further on memory supply constraints. That puts the DGX Station GB300 at roughly 12 to 17x the price of a DGX Spark, depending on which Spark tier you're comparing against.

GB10 is the chip inside DGX Spark: a 20-core Arm CPU paired with a Blackwell GPU sharing 128GB of LPDDR5X unified memory (about 119.68GB usable) at 273 GB/s. The B300 Superchip inside DGX Station GB300 pairs a full Grace CPU with a Blackwell Ultra GPU carrying 252GB of HBM3e at 7.1 TB/s plus 496GB of LPDDR5X CPU memory, for 748GB of total coherent memory. Same Grace-Blackwell design philosophy, a roughly 6x memory gap and a 26x bandwidth gap between them.

Only up to a point. NVIDIA itself frames DGX Spark for individual developers running models up to roughly 100B parameters and DGX Station for teams running frontier-scale models up to roughly 1 trillion parameters. A DGX Spark can hold a 70B model with QLoRA fine-tuning inside its usable 119.68GB pool, but a DGX Station GB300's 748GB pool fits LoRA fine-tuning on dense models up to roughly 337B parameters and quantized MoE models well past that, on a single GPU DGX Spark doesn't have a second copy of to shard across.

// Try It Yourself

Try It on Real GPUs

The GPUs behind these guides are the ones you can rent here: H100s, H200s, B200s, and more, billed per minute after a 20-minute minimum runtime, with no contracts. Pick one and you are live in under two minutes.

View Pricing
→
Or talk to our team
Spheron GPU instance going live and linking data centers across the globe